| Home | Products | Services | Contact Us |
For further information about the X-ray Camera-Fiber Cam/H and ordering information please visit this distributor: Viewbits
thickness of the layer can be adjusted and its preparation is our proprietary technology. This layer is very sensitive to scratches and thus the camera ships with a thin aluminum cover plate.
least 1/2” away from the sensor and will thus reduce the rate of sensor deterioration.This camera is currently based on the industry standard Hitachi KP-M1. Camera specs are therefore the same. The camera of choice may be changed with payment of some engineering charges. Our GdOs scintillation layer is applied directly to the surface of the fiber-optic bundle for maximum efficiency. The
The Fiber Cam/H represents a new way to capture X-ray images with standard analog CCD sensors. The Fiber Cam/H is a standard 2/3” monochrome CCD Camera with a fused fiber optic bundle that is attached directly to the image sensor with proprietary technology. It is designed for OEMs who wish to use a standard camera with X-Ray sources. Using this technology the sensor is at
Analog 2/3 Inch X-ray Camera with a 16 or 25mm Diameter Fiber Taper (Custom Diameters Available on Request) and a Gadolinium Oxysulphide (GdOs) Scintillation Layer. Perfect for inexpensive BGA, PCB, watch, small delicate part, inspection instruments where cost is a factor.
